Ask Experts Questions for FREE Help !
Ask
    JellyDonut's Avatar
    JellyDonut Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2008, 07:06 PM
    Replacing a microhood
    I have a ten year old Whirlpool microhood I'd like to replace with a GE microhood. I'm wondering if the mounting hardware is standard or will I have to start from scratch? Thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 30, 2008, 02:35 AM
    Usually the mounting hardware varies by manufacturer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Microhood ovens [ 1 Answers ]

I am trying to find a microhood that will fit under the older style cabinets. The standard height of 16-17" does not allow for enough room over the stove. I need to find a model that is 12-13" in height. It is had to believe that a manufacturer has not come along to address this need. I have...

Microhood Installation [ 3 Answers ]

I would like to install a microhood with an electric range I just purchased. I am getting conflicting information as to the amount of clearance needed for this. Some people say you need at least 16" from the top of the range elements to the underside of the microhood. Others have said that as...

Microhood installation [ 2 Answers ]

I am having a microhood installed over my electric range and need to know the minimum clearance that's possible so as not to ruin the microhood.

Microhood vent to outside [ 4 Answers ]

I have a couple quick (hopefully easy) venting questions and I'll provide more details as requested. 1) how does one go about connecting 3 1/4" x 10" ducting together? I want to make a short flange piece that feeds from the inside of the kitchen wall (behind the microhood) heading outside where it...

Microhood install [ 1 Answers ]

I purchased a microhood and the install guidel recommends a dedicated line with 20 amp circuit. The microhood is rated at 1100 watts. Can I use a 15 amp circuit. Only other thing running are some garage lights. Thanks for the help.

View more questions Search