Ask Experts Questions for FREE Help !
Ask
    llarryisme's Avatar
    llarryisme Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2008, 05:29 PM
    Hydrotherm boiler gas valve




    I'm trying to find out how to connect back up a milli volt gas valve some one pulled the thermo coupling and aquastat wires off the gas control valve hydro therm gas boiler model # hc180 app manufacture date was 1976
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Nov 19, 2008, 05:35 PM

    What connections do you have at gas valve? Are they th, thp, and p.
    llarryisme's Avatar
    llarryisme Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 20, 2008, 04:54 AM
    Quote Originally Posted by mygirlsdad77 View Post
    what connections do you have at gas valve? Are they th, thp, and p.
    I will get the letters and get back to u thank u very much
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hydrotherm Hot Water Boiler [ 2 Answers ]

I have a 1974 Hydrotherm hot water boiler Model HC85 that uses a millivolt gas valve and an Auqastat to control the circullating pump. My problem is that lately if the boiler is not used for a day or longer because no heat is required I have to jump start the boiler when it calls for heat by...

No Shut Off Valve between water heater and bathroom sink valve [ 14 Answers ]

I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search