Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Building a shed wall with 2x4's
[ 9 Answers ]
I have a 16x12 shed I'm building.. can't fit 12 or 16 footers in my car and no trailer... can I use 2x4x8's and cut them or am I running the risk of a weak wall?
Cost of building a block wall
[ 1 Answers ]
Hi there, can anyone give me a rough idea how much it will cost to build a wall 36' long by 3' high? Thanks!
Knee wall attic support for a Hip Roof
[ 6 Answers ]
Hello Everyone,. I'm in need of how-to to build a knee wall around my attic. When the house was built in the 30's, they used only 2x4's for rafters and some of those are actually failing. And, needless to say, there is a definite bow in all sides of my roof. I was told a knee wall would be the...
Insulating 'Sears' type house Floor/wall/attic
[ 1 Answers ]
I am planning renovations for my house which I am told is a 1948 'Sears' type house 1.5 stories, original wood siding, now with metal siding. Thick plaster walls with no insulation. Attic has insulation up to the top of joist. Floors have no insulation. Floors are cold on feet. Duct work only...
PVC vent in wall, through to attic. Constant leak
[ 7 Answers ]
Hello everyone. I've read this one before, but I have a similar problem yet it might be different.. here goes nothing. We have a constant leak in our family room, which is directly below the bathroom and our children's bedroom. Upon further inspection, removing part of the ceiling where the... View more questions Search
|