Ask Experts Questions for FREE Help !
Ask
    jhc65's Avatar
    jhc65 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2008, 05:46 AM
    Toro Model 20464 won't fire
    I have a Toro model 20464 self propelled mower. It has set up for a year without being started. When I tried to start it, it was not getting fire. I have put put a new spark plug in and used fresh gas, but there is still no spark. What should I do next?
    1983nab's Avatar
    1983nab Posts: 33, Reputation: 1
    Junior Member
    		  
    #2

    Dec 2, 2008, 08:41 PM

    Sounds like to me that it needs to be cleaned try sanding the coil and the flywheel
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Dec 5, 2008, 05:09 PM

    Hi,
    Sitting for a year leads to gummed carbs. "Fire" is what is often said when it does not start since you cannot hear the spark except with the plug out, grounded and in a quiet place.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I'm replacing a white rodgers 1F58-72 model thermostat with a Hunter model 44155C [ 2 Answers ]

There are some different wiring codes that are different how do I do it.

Local fire reg vs state fire reg [ 3 Answers ]

California state law requires 100 feet of vegetation clearance with 30' cleared and 70' reduced veg. The local fire district is saying all 100' must be cleared. Can the local regulation be stronger than the state? Thank you for any help.

Intertherm model #1265 burner won't fire up [ 2 Answers ]

Pilot is lit,blower works,stat is good,burner will not kick in

View more questions Search