Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Moving kitchen sink cut up the slab floor cani pour concrete on top
[ 7 Answers ]
I am moving my kitchen sink from one side of the kitchen to the other I located the 3" discharge line which is about 5' from my new sink. I have cut the concrete and i am about put a 3 x 3 x 2 tee and then run my 2" line along and up under the sink to the p trap with a 90. ( I hope this is correct)...
Installing a concrete shower floor over a custom concrete pan.
[ 4 Answers ]
I want to install a stained concrete shower floor instead of tile. I have already installed a custom shower pan and pitched it to specs. My question is should I be concerned about the new floor cracking since it will only be 1/2" thick? If you have any other suggestions on the install, please...
Converting a tile floor to a stained concrete floor
[ 2 Answers ]
I am thinking about taking up the tile in my kitchen and staining the concrete underneath it, but I don't know if it will be possible to get up all the stains left on the concrete from the tile. I do not want to take up the tile if there is too much of a possibility that the tile stains won't come...
Repairing cracks and painting concrete garage floor
[ 3 Answers ]
My garage floor was painted when I moved in and the house was new. I'm selling the home now so I am filling the cracks on the garage floor and after it's patched I will repaint it. I am using a scraping tool and removing the paint from each side of the crack before I repair it as I think that's...
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to... View more questions Search
|