Craftmaster electric water heater

adsmith27 Posts: 2, Reputation: 1

New Member

Nov 9, 2008, 06:36 PM

Craftmaster electric water heater

Get 240v at top heating element but only 70v at bottom heating element. Already checked wireing

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Nov 30, 2008, 02:54 AM

Need new thermo switch

Add your answer here.

Check out some similar questions!

Electric hot water heater [ 7 Answers ]

I have attached and filled tank. I wired heater to plug--grounds attached to proper screws. When I touch the electrical outlet box cover (metal) and copper pipe on the heater, I get shocked. The outlet has space for three wires ( 2 hot and 1 nuetral ) the wires coming to the outlet have 1 hot, 1...

Replaced electric water heater Atlanta area, but no hot water [ 14 Answers ]

The old water heater died. Bot one (38 gals) at HD. Installed exactly like the old one was as follows--3 CPVC pipes come out of wall. Two are joined. Before they are joined one has a valve. After they are joined there is a second valve. The pipe is connected to the cold side of the heater using...

Electric hot water heater [ 1 Answers ]

Wiring diagram to wire an electric hot water heater to breaker panel

Electric Water Heater [ 2 Answers ]

I have an electric water heater this about 10 yrs old. I have to constantly press the reset button because the heater runs out of Hot Water. When I press the reset button after a while the water becomes almost scalding hot and will eventually turn cold again, which forces me to press the reset...