 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat pump blower
I can't turn on the blower with the fan switch at the thermostat. It will sometimes come on automatically in auto position. The squirrel cage is very free. I can spin it. The heat strips turn on for the heat pump but the blower will not distribute the heat. Once in a while it will come on but not long enough
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Furnace/Heat Pump seems to be working incorrectly. There are times when the Heat Pump outside will run continuously while the thermostat says "heating" however, the blower doesn't come on inside. The coil coming into my furnace unit gets very hot. I have to turn off the unit completely for...
I've read about blowers (heat pump) that won't shut off, no matter what done to thermostat, and the cause typically being a faulty control board, and/or fan relay on contl. Board. I replaced board, as tech removed green wire to demonstrate it's fault (didn't turn blower off), but tried a brand new...
I have a trane heat pump, last year I replaced the defrost board. This year the heat pump goes on. Then I can hear the thermostat click and compressor go off. I know the interior blower is to go off after one or two minutes, but blower continues to run and I have to switch the main breaker off....
My problem I believe is with the blower control on a heat pump. With the thermostat in COOL or AUTO, the outdoor unit stops as expected when the temperature setpoint is reached. But the blower does not stop running. It continues to run as if it's in a manual run control. If the breaker to...
I have a Coleman heat pump that is less than 2 years old and has worked well up until a couple of days ago. Now, the air conditioning and the heat will not work, but the fan and furnace still works. After checking things out myself for small problems with the electrical box, etc, I noticed that...
View more questions Search
|
