Ask Experts Questions for FREE Help !
Ask
    Davidz313's Avatar
    Davidz313 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2008, 07:36 PM
    Celing fan with 4 switchs in new house
    Check this out... I have four switchs for my celing fan in my living room 2 on each side of the room 1 3 way and 1 reg switch in each gang box only one side works also light in bathroom do not work only getting 3 volts on the multimeter this bathroom light is also on same circuit please help
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Nov 6, 2008, 10:10 PM

    Ok, if you have four switches for the ceiling fan, what are they supposed to control? Is it a 3 way set for the motor and a 3 way set for the light?
    Davidz313's Avatar
    Davidz313 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 6, 2008, 10:25 PM
    The 3 ways control the fan and the reg switch turns the light on and off
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Nov 11, 2008, 01:22 AM

    So you have two, or three switches for the fan motor? And one for the light kit?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay celing fan install with odd house! [ 4 Answers ]

I have a double wall switch to separate the light and the celing fan controls. The fan has a white, black, blue (light), and green (ground). The problem is the home!! I only have 2 whites (twisted together currently), 2 blacks (twisted together currently), ground. How to I wire this? Thanks!

3 way switchs [ 6 Answers ]

I installed recess lights in my living room 5 total. Jumping one light to the other. The last light has the line going to a existing wall mount with 2 three way switches in the wall already. I cut the wall open wider to hold all three switches including the switch for the line I just ran. My...

3 sets of 3way switchs on 3 separate floors. [ 3 Answers ]

I have a client who has 3 sets of three way switches one set on each floor. The purpose so I am told is that who ever enters the hallway can either turn on the hallway lights (on all three floors) or shut them off at their respective door entry. The second of the set again I am told is to turn on...

Celing fan [ 4 Answers ]

I need assistance to understand how to disassembly a celing fan I have at home. I took off the wings and now I want to know how disassembly the motor from the celing. My knowladge it is screwed to the celing, the only problem I have is that the cover for the celling is not allowing me to use the...

View more questions Search