Ask Experts Questions for FREE Help !
Ask
    PhillipH's Avatar
    PhillipH Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2008, 08:28 AM
    Furnace blower on, not heat
    I have an Amana 880SSE furance. I couple nights ago all the CO detectors in the house went off & the furnace quit "heating" but blower stayed on. I went through normal "troubleshooting" & it started working normally. Last night the CO detectors did NOT go off, but the furnace again stopped producing heat, but the blower stays on.?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 6, 2008, 09:08 AM
    It could be a few different items on the furnace but what concerns me the most is the fact that the CO detectors went off. For the sake of yourself and family please have a professional HVAC person do a ON SITE visit to your home and have them check the heat exchanger. Amana has had some problems with heat exchangers in the past and while they are there have them look to see what the problem with the furnace is. It is possible these two situations are related.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace blower on - no Heat [ 20 Answers ]

I have a Carrier furnace with an automatic ignition. The fan is constantly running but it is not heating. Additional Information: Model 58PAV: The Red Led Status light is rapidly flashing - which according to the manual means 'Line voltage (115VAC) polarity reversed. If twinned, refer to...

Heat Pump Tonage & Furnace Blower [ 15 Answers ]

I'm currently in the mists of trying to purchase what is now probably going to be a heat pump. Trying to do some research which is raising more questions. Also have a salesman who isn't explaining things well & is now playing games with pricing. (I've got a call in to another guy who hasn't...

Blower won't run in auto for heat with oil furnace [ 9 Answers ]

I have an oil furnace. A/C works fine. Heat last season worked fine. Started up furnace this year just fine. But blower would not start on auto. The blower will run in heat mode when set to On. I replaced the Limit Switch in the Plenum. No change.

Furnace Blower stays on, no heat [ 2 Answers ]

Hello, I have an older Bryant furnace model # 396gadd36075. I turned on the heat the other day and the no heat. I notice the unit had been turned off (pilot was not lit), apparently by the service company I use when they came to do the spring check for the AC. I followed the instructions to...

View more questions Search