Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathroom Wall Tile - HELP!
[ 6 Answers ]
Uh oh! My first attempt at putting tile on a bathroom wall and I may have a problem. Here is the story. I installed Hardibacker board around the tub and green board in the rest of the bath. I taped the seams and used joint compound, then sanded (several times). It looked so good that I taped...
Tile Underlayment in Bathroom.
[ 3 Answers ]
Due to a cast iron toilet flange that sticks up approximately 1" after old tile/mortar removal, I need to build up an underlayment. The subfloor is 3/4" plywood 16" oc. I am thinking about putting down a 5/8 layer of plywood and than 1/4 cement backerboard to get level with flange for tiling....
Bathroom tile
[ 1 Answers ]
Hi, I have removed the old shower tiles and the surface has the old thin set on the floor in spots. I also, took some of the mortar out with the old tiles. Do I need to resurface the floor with new mortar and fill in the low spots and smooth over before laying the new tiles? This is my first tiling...
My bathroom has 2 layers of tile/ can it take a 3rd?
[ 4 Answers ]
My bathroom has 2 layers of tile and the woman who owned it before me tried to remove the tile. ( she did about a 1 ft square before she gave up- that's how I know there is 2 layers) she was very proud of the carpet she GLUED to the floor with contractors glue!! YUCK!! I am going to rip the carpet...
Painting bathroom tile
[ 3 Answers ]
How do I remove paint from ceramic tiles in a shower? View more questions Search
|