Ask Experts Questions for FREE Help !
Ask
    mikeb1977's Avatar
    mikeb1977 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2008, 03:29 PM
    Frigidaire model fqx233nbs2 won't spin
    Washer will not engage the belt to turn tub. Looks like the belt is a little worn but not bad. The motor turns and there is no oil under the washer. It will agitate.
    mguirate's Avatar
    mguirate Posts: 15, Reputation: 1
    New Member
    		  
    #2

    Nov 5, 2008, 05:23 AM

    Check lid switch. Or there could be a transmission problem. I need more info.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frigidaire washer agitates but won't spin [ 8 Answers ]

Model # FWS445RFS2 My washer will wash but will not spin. The tub will not turn by hand at all. I have checked the switch and the belt and they seem fine. Also, before this started I notice the clothes were more damp than usually in the bottom of the tub. I heard a loud clanking like metal...

Frigidaire Model Gas dryer [ 2 Answers ]

I have a frigidaire gas dryer model number GIGR341AS1 and it has stopped drying the cloths is this a overall dryer problem or can I replace a certain part on this dryer

Refrigerator Frigidaire Model JSI-26 [ 0 Answers ]

Help! :( I lost the manual of my new refrigerator and I need it to clean it the right way.. Do any one knows if I can download it from the internet in English or Spanish? Where? :confused: I'll be very thankful with your help.

Frigidaire affinity front load won't spin [ 2 Answers ]

My front load washer does everything wash,tumble,drain but it won't spin.we already cleared the hoses of debri any ideas on what's wrong with it its only a year and a half old.Thanks

My Frigidaire, friggin won't spin! [ 1 Answers ]

I have a Frigidaire washer, and it seems to agitate just fine, however when the spin cycle starts at the very the belt moves maybe a quarter of an inch and then locks into place. No spinning, none, notta. Why? And what do I do to fix it? Thanks

View more questions Search