Ask Experts Questions for FREE Help !
Ask
    dorothykarpinsk's Avatar
    dorothykarpinsk Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 3, 2008, 02:38 PM
    RTH6300B uses 5 wires mine is 6 wires
    Do I need 6 wires and the 6th wire is marked W2. Where does that connect to?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 3, 2008, 02:54 PM
    You probably have the wrong type of thermostat. You probably need a 2 stage heat thermostat from the limited info provided.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing Honeywell RTH6300B but I have 7 wires. [ 1 Answers ]

I have a York t-stat for a York system and purchased the 6300. My York t-stat has 7 wires (W, B, G, R, X, O, Y). Of those, the Honeywell instructions indicate that the 6300 will use C, G, W, Y, R, and possibly O or B. It says that if you have both O and B that you should install O and tape up B...

How to connect wires to a RTH6300B honeywell thermostat [ 2 Answers ]

I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated

3 wires + 2 wires  POOL MOTOR [ 2 Answers ]

I need help connecting a motor for my pool. The motor has 3 wires coming out of it. 1 white, 1 black, 1 black with a white stripe. A continuity test on the 2 blacks says they are wired together somewhere. I have a power cable coming out of the ground. 1 white + 1 black cables inside. ...

Honeywell RTH6300B, 6 wires and no clue [ 5 Answers ]

I took out a hunter programmable and replaced it with a honeywell. Heat worked fine but air won't work now. I have 6 wires red, orange, yellow, white, green, black. I have green in G, White in W, and red in R. I have yellow, orange, and black and Y and Rc left. What do I do? Is there a way to use a...


View more questions Search