 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Nikkilove, Please lift the lid from your toilet tank and tell us which type of fill valve do you have. There may be Debris inside the fill valve if you tell us which type fill valve is install we will tell you how to clear the debris,see the images, Thanks. John |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I have a confusing problem.I just installed a new toilet in place of an existing one. The promblem is when I flush the new toto toilet, my other toilet bowl almost completely empties.. The 2 toilets are basically back to back, and use the same vent pipe through the roof.(3 inch copper).No pipes...
My toilet continues to fill and fill but it never does get filled. I googled this and found a lot of help and have searched this forum but I couldn't find an answer. - I noticed a leak at the top of the tower which has the rod then the ball thing attached to it, I tightened those screws at the...
Toilet rises, bubbles and partially empties itself when another toilet is flushed. The water drains fine from the flushed toilet. House is ranch stlyle on a slab and connected to a public sewer system. The toilets are not back to back, but about 10 feet apart in two separate rooms We had heavy...
Hi, Just recently (last few days) my toilet in the basement bathroom has begun to bubble. This is caused when one of the upstairs toilets (directly above it) flushes but not another one upstairs. It also bubbles quite rapidly when the clothes washer drains. The washer is located in the...
I have a 2 storey layout house. The guest restroom on the ground floor is exactly below the Jack and Jill Washroom of the top floor. It looks in both the restrooms the toilets share the pipe line The problem is when someone goes to restroom on the ground floor , the top floor toilet gets...
View more questions Search
|
