Ask Experts Questions for FREE Help !
Ask
    heatman53's Avatar
    heatman53 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 29, 2008, 03:17 PM
    Tempstar furnace
    I just installed a Tempstar oil fired furnace and the small transformer in the electric box hums all the time, does anyone know if this is normal,I can not find a number for Tempstar thanks Ron
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Oct 29, 2008, 03:33 PM

    Have you checked voltages in and out of the transformer to make sure they are within ratings?

    There is always a quiet hum from these transformers, however if it is loud, I would change it out. If you get the same noise from the new trans, then there isn't much you can do about it. Just the nature of the beast. Hope this helps and please let me know what you find.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need age of Tempstar Furnace [ 9 Answers ]

I have a Tempstar Furnace Model # NUGK125DK03 / 867.769442 I am trying to find out the age of this furnace. It says it is High Efficient. Can someone please tell me the approx date of manufacture or a location where I can get this info. Thanks.

Tempstar Furnace [ 2 Answers ]

I have a gas Tempstar furnace , The pilot ignites but the furnace does not it tries a few times then stops. The blower works . What might the problem be?

Tempstar furnace [ 6 Answers ]

I have an 80+ tempstar with the smartvalve gas valve. During the call for heat, the inducer motor starts, but the ignitor will not come on and light. I checked the ignitor and it is good. I checked for voltage and it is good. Could the gas valve be bad, since the ignitor is controlled by the valve...

Tempstar furnace [ 1 Answers ]

My tempstar furnace burners light and then turn off, light and turn off, they cyle about every 3-5 seconds, when they should burn continuously. What is the problem?


View more questions Search