Ask Experts Questions for FREE Help !
Ask
    Jaypeeno's Avatar
    Jaypeeno Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2008, 01:19 PM
    How to setup an automobile workshop
    I'm really interested in starting an automobile workshop and I'll like to know how to go about it. That is the organisation, workshop layout, tools and equipment, and any additional operation information. Thanks.
    mikemihir's Avatar
    mikemihir Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Sep 2, 2009, 01:19 AM
    Dear Jay

    Things to prepare:
    General Work Shop for all Models or Company Authorized service center.
    Two wheelers or four wheelers work shop

    Decide and let me know on [email protected]
    I will be able to help you on all fronts after that .
    Waiting for the response

    Regards

    Mihir Kashyap
    iyaz1071's Avatar
    iyaz1071 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 4, 2010, 12:37 AM

    I'm really interested in starting an automobile workshop and I'll like to know how to go about it. That is the organisation, workshop layout, tools and equipment, and any additional operation information. Thanks
    ikchhetri's Avatar
    ikchhetri Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Oct 30, 2011, 09:48 PM
    Try the link- http://www.sindhagri.gov.pk/feasibi/SMEDA%20Auto%20Repair%20&%20Service%20Workshop.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

125 amp service to a workshop [ 1 Answers ]

I want to add a 125 amp service to a free standing workshop about 70 feet from my home. There is already some 15 amp circuits to the building but I blow those on a regular basis. I've measured and found I'll need 95 to 100 feet of aluminum cable to go from an existing 200 service panel in my...

Workshop/Garage GFCI [ 4 Answers ]

What does it say in the code book about GFCI in a workshop. I plan on running 3 circuits for plugs. 1 down each side wall and one across the back wall. Do I need 3 GFCI, 1 on each run? How exactly does that play out with the code. Also, are they they be connected at the start of the run OR in...

Adding a Workshop [ 4 Answers ]

I am wanting to add a 40'x60' workshop on my property (36.5 acres in East Texas). I already have two meters at opposite ends of the property and will add a third meter for the workshop and a future home site for retirement. I am going to have the pole placed near the home site about 100' inside...

Workshop electrical wiring [ 2 Answers ]

Yesterday I had a question, and the only answer I got I couldn't understand what the gentleman meant. Of course, I don't know much, if any, about electricity, and I need to buy the supplies for a friend to install it... I'm bringing power to my workshop in my backyard, about 90 feet or so from the...

Bringing power to my workshop [ 1 Answers ]

I have built a workshop in my backyard, and I'm trying to bring electricity to it. I have to use the attic to bring the wires to the back of the house. From the main panel to the shop we have around 90 feet or so. I was told to get a subpanel and to put it in the workshop. Now... I just want two...

View more questions Search