Ask Experts Questions for FREE Help !
Ask
    JimK39's Avatar
    JimK39 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 28, 2008, 08:00 AM
    3 handle faucet leaks with hot water
    I changed the washer and the seat and the hot water faucet still drips. I exchanged the hot water valve with the cold water valve and the hot water still leaks. Shoud I buy two new valves? ( the system is old(38 years old) Should I buy new faucets? :0 :( Jim
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Oct 28, 2008, 08:38 AM

    Hi Jim,

    What brand and model number is your faucet?

    Most Moen, Delta products has life time warranty if you call them will sent any part that is bad for free, Thanks.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Hot Water in Shower - Moen Single Handle Faucet [ 38 Answers ]

I've read most of the questions on this website about this matter, but I'm still confused. I pulled off the handle and wall plate. But what do I do after that? I see a small (4 inch approx.) hole in the wall with a "unit" that looks like a cartridge that holds the handle. I can turn it to hot...

Tub faucet still leaks AFTER I've turned of the water.any ideas? [ 1 Answers ]

Aloha~ Our tub faucet still leaks AFTER I've turned of the water. I'm a little hesitant to go further into the repair as I don't know if there will still be water flowing. Oh, and it's the HOT water faucet that won't stop dripping. Any suggestions would be greatly appreciated.

Kenmore 70, cold water faucet leaks [ 8 Answers ]

I am so mad, its dripping all over the floor when I wash. I put some putty dope on it, and that just doesn't work. It makes a hissing sound like pressure is building up in it. The back of my washer is all rusty and I had to move it away from the wall. What the heck is going on. Thanks:(

Moen two handle faucet - no cold water [ 3 Answers ]

Hi all, I have a whirlpool tub with a 2 handle Moen faucet that apparently worked fine earlier this week (thinking about it, I have never used this tub since moving in close to 2 years ago!). The problem is the cold water handle only delivers a trickle of water. I have found the water...

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...


View more questions Search