Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires
[ 1 Answers ]
I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...
Wiring a honwell rth7500d thermostat
[ 1 Answers ]
My old magic stat thermostat is wired as follows Red and yellow wire both to R terminal with jumper inplace for rc Balck and green wire both to W The directions for the new thermostsat says no 2 wires to the same terminal Can any one help, I am a little confused... I have a...
WIRING DILEMA , Honeywell Thermostat RTH7500D Programmable
[ 2 Answers ]
Hello, I want to replace an Old thermostat mechanical type WHITE-RODGERS 1F56W-361model with the high tech Honeywell RTH7500D Programmable,. read carefully the Owner's Guide but my situation doesn't fit any description. I have 6 wires on the old thermostat to terminals: -RG(1wire) -RH(2...
Help with new Honeywell RTH7500D
[ 1 Answers ]
Hello Everyone. I just bought my new thermostat and installed it. Using my old thermostat, an old mercury White-Rodgers, I wiring the Honeywell to what I thought was a "conventional" system. I have gas heat and electric A/C. Outside I have the fan unit which blows air into the compressor and...
RTH7500D honeywell help please
[ 2 Answers ]
I bought a Honeywell RTH7500D and am trying to install it, but (as appears to happen frequently) the wiring guide in the install manual does not match the wire labels from the old, non-programmable Stat. What I have in the OLD one: V RH RC G Y View more questions Search
|