Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New 3 Way Switch Wiring
[ 4 Answers ]
I'm finishing my basement and after looking at dozens of 3 way switch diagrams online, I'm still confused. I've already run the wires and here's how I did it. I've got 6 recessed lights on 14/2 that come back to switch box 1. The power from the panel comes into switch box 1 as well. I then have...
Specialty bulbs blowing
[ 6 Answers ]
We've already assessed that in this apartment, we are getting about 124 volts at the box. I've had a big problem with regular incandescents blowing, but will soon be replacing them with 130v bulbs (as soon as the current 120v ones burn out). So that problem should be solved. However, my...
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
3-way switch wiring
[ 1 Answers ]
I am having trouble wiring a 3way light system. I am looking to run two lights from both ends of the switches. My explanation is I had a single light & switch at the top of stairs and a single light & switch at the bottom of stairs. I have ran 12-3 wires between switchs but not sure how to wire...
Where to find specialty bulbs
[ 4 Answers ]
I have a "wonderful" Hampton Bay fan from our friends at the home depot. My bulbs finally burned out and I need to replace them. The problem is, no one carries the bulbs in the size and wattage I need. The fan has up lighting with C7 15W bulbs and down lighting with candelabra 45W bulbs. Any... View more questions Search
|