Ask Experts Questions for FREE Help !
Ask
    tboy56's Avatar
    tboy56 Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2008, 02:32 PM
    Blower motor
    I have a janitrol gas furnace that the blower motor will only go on if a put it on manually other than that the furnace works fine for 20 yrs old help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 12, 2008, 03:34 PM
    Sounds like the fan and limit control is not working correctly or has gone out of calibration. Usually they are located on the face of the furnace. Most of them have a white button that will allow you to activate the blower motor manually.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do I need a new blower motor? [ 3 Answers ]

Hi! I have a York HVAC system. Yesterday, the blower started turning off after a few seconds to a minute of running, then turning back on and off repeatedly every few seconds to a minute I took apart the blower unit and cleaned it and put it back in (what a pain in the... ), making sure all...

Blower motor [ 1 Answers ]

Where is the blower motor located in a 1996 dodge dakota 2.5l?

Blower motor [ 1 Answers ]

I have a Coleman airhandler which is about eleven years old. I had a new Nordyne heatpump installed about a year and a half ago. It worked fine until a month ago, now the blower will only go off when the breaker is turned off. The thermostat has no effect on it, however the a/c cycles fine. Could...

Blower Motor [ 1 Answers ]

I have read multiple posts about wiring for blower motors and saw one that almost answered my question. I have an old blower motor that I would like to convert to a shop air filter. I know that it is a multi-speed motor. It has 8 wire connections and are labeled as such: Power cap cap ...

View more questions Search