Ask Experts Questions for FREE Help !
Ask
    ff423's Avatar
    ff423 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2008, 12:14 PM
    Car won't drive
    When you put the car in gear and let the ckutch out the car starts to roll then you hear a popping sound that continues. Could it be the tranny or possibly the CV's?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Oct 13, 2008, 09:54 AM

    It could be either one. It could be both. You could have faulty clutch components or any of the above problems.
    Is the "popping" noise always there when the vehicle is moving?
    Does the noise change when you speed up?
    Hands-on diagnosis is vital in this situation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cd drive problems/hard drive [ 4 Answers ]

I'm using windows xp pro I've got a lite-on combo cd drive :E Basically I tried 2 fix my e drive because it wasn't reading cds (on dvds) and I think I put a virus on my computer When I tried 2 restart it came up with something like.. Windows cannot start up properly due to a recent...

Win 2003: Permanent drive letter 4 removable drive [ 2 Answers ]

I have set up a backup system on Windows 2003 Server using 2 hot-swap removable drive drawers with hard drives in them. I have a pair of backup drives for each day of the week, with one drive imaging the OS partition and the other drive imaging the data partition. The system is working beautifully...

Drive not ready. Insert boot disk into drive A: [ 4 Answers ]

I am currently trying to upgrade from windows 98 to windows xp. I have upgraded the RAM to 256. When I reboot I get "Drive not ready.. Insert Boot Disk into Drive A:". I have gone into the BIOS and have changed the boot sequence to boot first from the hard drive then the cd rom. It still...

USB External Hard Drive (drive connect problem) [ 7 Answers ]

After connecting my external hard drive to a usb port. Assigns to a used drive F. to get to the ext hd I have to disconnect F then I'm able to open the ext hd. How can I get the ext. hd to go to the next available drive letter or can I assign one?

Changing my default drive drive. [ 2 Answers ]

I have partitioned my HD into c, e and f drives. My operating system is in c and I want to use e: as my default drive as it is much larger than my c: drive. (My hd is 250 gigs). How do I stream everything toward my e: drive and leave c: strictly as an OS section?

View more questions Search