Ask Experts Questions for FREE Help !
Ask
    irotkovitz's Avatar
    irotkovitz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2008, 04:24 PM
    Briggs/Stratton 28v707 engine ignition
    Rider mower has no spark at plug. Engine is BS 28v707. Removed flywheel looking for points. Didn't find any and can't find any schematic that would show if/where an electronic ignition module would be. Any idea where I can find 1) points if any, 2) electronic ignition module if any, and 3) wiring schematic and repair manual online.

    I replaced plug first before doing anything else and checked plug with an OHM meter. The plug checks out OK so I'm really at a loss how to proceed.

    Thanks

    Ivan Rotkovitz
    [email protected]
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Oct 10, 2008, 04:58 PM

    Repair manuals are purchasable at B&S:

    Both Home - Briggs & Stratton and Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears PartsDirect | SearsPartsDirect.com from Sears should have exploded diagrams. No troubleshooting stuff. See above.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20.5HP Briggs and Stratton Engine Ignition [ 9 Answers ]

I have a 20.5HP Briggs and Stratton engine that turns over once or twice, then doesn't do anything else. New battery, all leads cleaned (battery terminals, solenoid leads, starter lead). The engine is about 10 years old. I don't know a great deal about small engines, so please keep it in layman's...

Briggs Stratton Vanguard ignition [ 1 Answers ]

I bought a 15 year old high-end pressure washer with a 16hp Briggs Vanguard on it. It would run for awhile then shut-down. I took it to the local shop, because we were very busy. They replaced the carb, and tuned it up. It would fire up right away, but still died. It also didn't charge the...

Briggs Stratton 28v707 [ 4 Answers ]

Had to get a new engine for Murray lawn tractor. The old engine has two wires coming off the stator. Red DC output, black AC output (goes to key switch only) according to the wire diagram. New engine has only a red wire off the stator? No black. Do you need AC for the system or can I get along...

Briggs & Stratton 10.5hp ignition circuit [ 1 Answers ]

Hello and greetings from New Zealand. I am wanting to fit a key activated ignition switch on to my B&S 10.5hp rear engine rider. The current systems is just a push button kill switch and a manually operated solenoid for the starting. As I have grand kids running around the yard on a regular basis...

View more questions Search