Ask Experts Questions for FREE Help !
Ask
    rain lady 2's Avatar
    rain lady 2 Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 1, 2008, 10:24 AM
    Fireplace Flue
    I am building a home. It has a 2 sided fireplace. Where is the correct place to have the flue up the center or on a side for proper drafting>?
    amricca's Avatar
    amricca Posts: 851, Reputation: 92
    Senior Member
     
    #2

    Oct 1, 2008, 12:05 PM

    Up the center, a flue on the side would not vent properly
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #3

    Oct 3, 2008, 04:53 AM

    By two sided fireplace, do you mean a fireplace open on both sides or two fire places back to back in different rooms? Are we talking masonary or prefab?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Minimum clearance around furnace flue [ 1 Answers ]

Time to remodel again and this time it's the 2nd floor. I have a space which contains the chimney flue. If during remodeling I want to enclose the metal furnce flue, what is the best way for fire safety to do this and what are the minimum clearances?

Gas burner flue? [ 3 Answers ]

I just had my fireplace flue cleaned on my recently purchased 50-yr-old house. The service guy told me that the other flue -- the one to my gas burner -- was very damaged and needed to be relined. Is this possible? The house was converted from oil to gas about 20 years ago, and the gas burner...

Leaking around boiler flue when raining [ 1 Answers ]

When it rains heavily I get a terrible leak around the chimney flue which enters the boiler in my basement (I think it's called the flue it's the piece coming out of the foundation wall and into the boiler). I have a chimney cap and inspected the crown of the chimney and the outside structure......

Metal tape on furnace flue? [ 6 Answers ]

My furnace flue is a double walled pipe, 6-inch (I think) inside 8-inch (I know). It goes up through a chase in the middle of the house to the attic, where it basically comes out of wooden framework and continues on to the roof. The chase is open to the attic. I want to close off the top of the...


View more questions Search