Ask Experts Questions for FREE Help !
Ask
    CAP220's Avatar
    CAP220 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2008, 01:10 PM
    Replace 4 speed moter with 3 speed
    I have a white rogers 50a50-471 supplier only has a 3 speed motor to replace 4 speed motor in trane xe80. Can this work and how to wire to controller
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 27, 2008, 02:12 PM
    This is the replacement for the W/R board you have

    http://www.white-rodgers.com/wrdhom/..._06_pg0066.pdf


    These are the instructions for the new style board

    http://www.white-rodgers.com/wrdhom/.../0037-6265.pdf


    Trouble shooting

    http://www.white-rodgers.com/wrdhom/...pg0259_264.pdf

    On the W/R boards you have a selection for one speed for heat and one speed for cool. The rest of the terminals are maked park and you can just park the extra wires there since they have no effect on the operation of the furnace.

    Usually cool is the highest speed available on the motor and heat is usually the second to the lowest speed on the motor. The motor will have a diagram on it or the blower door will have a diagram on it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between true air speed and equivalent air speed [ 4 Answers ]

What is the difference between the two and when an aircraft is flying at altitude what is its actual speed

Variable Speed vs. Single Speed Blower [ 1 Answers ]

Questions: Getting 2 new heat pump systems installed. 1.5 ton upstairs and 4 ton downstairs. Decided on Comfortmaker. Heat Load calc performed on sizes. Going 2 stage with variable speed downstairs with Honeywell IQ Pro stat. Was going to go one stage with variable speed upstairs with...

High-speed Cable/low Speed Operation [ 1 Answers ]

I had Time Warner Cable(TWC) Road Runner service(high-speed cable) installed recently on my Panasonic CF-47 Laptop. It turns out that it operates two times SLOWER than Dial-Up!! I have a W98 O/S. The High-speed cable into the computer measures normal(as measured by a super-tech with TWC). After he...

Replace air handler with variable speed [ 1 Answers ]

I want to know if I can replace a standard air handler on a 5 ton system with a variable speed air handler without replacing the outside unit. The electronics on the air handler will be different but does the compressor work full time or not.

View more questions Search