Ask Experts Questions for FREE Help !
Ask
    jbl2166's Avatar
    jbl2166 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2008, 01:09 PM
    Teromostat wiring honeywell digital/ noprogaming
    I'm replacing my theromosta and don't know which wire is what, Have 4 wires red, blue, green, white/Yellow is there a commont color for heat, air, fan etc
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Sep 22, 2008, 07:35 PM

    The normal colors are:
    Red is the 24 volt hot wire from the transformer
    The green is the power back to the blower motor relay.
    The white is the power back to the gas valve.
    The yellow is the power back to the condensing unit.

    You said you have four wires but you name five.

    It looks like you meant one wire to be called a yellow with white. In that case I would think it was the gas valve and the blue was the AC unit.

    Give me more details and I will try again to help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Honeywell thermostat - not digital [ 1 Answers ]

You have the temp setting at 70 degrees.. some cold air comes out but 2 hours later the room temp reads 80 degrees on Honeywell , Also have a room thermostat that reads 76 degrees, do I need add'l freon or the thermostat needs replacing.

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

Honeywell digital thermostat [ 1 Answers ]

Blinking house with #2 inside this picture, what does this represent/mean?

Need help with wiring a Honeywell T8011 Digital Thermostat [ 4 Answers ]

I bought the 'T8011R1006' programmable Digital Thermostat to replace my existing 'T874R1822', Analog Thermostat that controls a 2-Stage Heating and 1-Stage Cooling Electric Heatpump, The Sub-base model of the existing thermostat is 'Q674L1710'. The volts going into the thermostat is 24V. The...

View more questions Search