Ask Experts Questions for FREE Help !
Ask
    bootif's Avatar
    bootif Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 19, 2008, 04:03 AM
    How does a soleniod supposed to be wire on a murry lawn mower model #28v707

    I have a murry riding lawn mower model #28v707 and I took the old solenoid out put the new one in and I want to know if I have it wired right how is it supposed to be wired

    >Moved from electronics<
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
     
    #2

    Sep 19, 2008, 07:29 PM
    They are all but inpossible to hook up wrong. As long as you have the small wires on the small posts and the big wires on the big posts it should work.

    If it has two small wires, one is a ground and the other is a positive. They engage the solenoid and make the two large post connect together inside. If it only has one small post then it grounds through the mounting screws on the solenoid and the small wire going to it is a positive wire that engages the solenoid.

    Isn't that correct all you experts?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murry Lawn Mower [ 2 Answers ]

I have a Murray riding lawn mower 11hp 38" and I do not know how to tighten the tension belt, how do I do this, or where is the screw for tightening it.

Murry rear engine riding mower [ 2 Answers ]

How do I wire up my solenoid on my Murry rider? The reason I ask is because I took it apart several months ago an forgot how to wire it back up, a generic diagram would be nice. Thanks

Murry riding mower [ 3 Answers ]

My murry riding lawn mower will not start and we have changed the battery but still can not figure it out

Murry riding mower [ 1 Answers ]

I Have A 46 In Murry With 18.5 Engine Need To Find The Model Needing A Deck.the Id Under Seat Is Unreadable All I Have Is A Tag On The Motor.can Anyone Help? Motor-42a707 Type - 123801 Code -9512085a

Murry Riding Mower Charging System [ 2 Answers ]

I replaced my battery in my 13.5 hp Murry riding mower. I got two starts on it and the battery died. I had the battery tested and it was good. I was told the starting solenoid would not be the problem. The battery is not getting recharged. The key is in the off position, my lights are not...


View more questions Search