Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I need a 100A subpanel from parallel 100A main panels
[ 3 Answers ]
I'm planning to install a low voltage driveway snow melt system that will require 70A (240V). I want to run this from a new 100A subpanel in my attached garage. My problem is that my 200A service is split into two 100A main panels. How would I accomplish this? My other option I suppose is to run a...
Can I go smaller than 100A sub-panel?
[ 1 Answers ]
I want to wire a detached garage/workshop, and I was wondering... Is 100A as small as I can go? If not... what are the smaller size sub-panels that they make... that are legal as far as code allows... Thanks in advance for the help.
Wire to a 100A sub-panel
[ 1 Answers ]
I want to run copper wire from my 200Amp main electrical panel to a 100Amp sub-panel. The 100Amp panel will feed a heat pump compressor, air handler with heat strips (total load = 70 amps) and about 4 20 amp outlet lines. I have previously wired a 60 Amp sub-panel in this house. The panels would...
100A Service
[ 1 Answers ]
How do I Install a 100 amp single phase three wire service?
#00 to 100a breaker
[ 1 Answers ]
A friend of mine ran #00/3 from his house to his garage, but only wants a 100a service. What can I use to hook up #00 to a 100a main breaker, because I don't think the physical size of the wire will fit under the lugs in the breaker. Also I plan to run a #6 to a ground plate buried 3' outside the... View more questions Search
|