Icemaker ice mold overfills

tksionsk Posts: 1, Reputation: 1

New Member

Sep 15, 2008, 12:24 PM

Icemaker ice mold overfills

I have a kenmore sxs model 1069552812 refrigerator and the icemaker ice mold keeps overfilling. Any suggestions??

hkstroud Posts: 11,929, Reputation: 899

Home Improvement & Construction Expert

Sep 15, 2008, 12:54 PM

Replace water fill valve.

Add your answer here.

Check out some similar questions!

The toilet tank overfills [ 15 Answers ]

When I moved into my home 4 years ago I found the toilet tank to always be filling to the top and dripping into shaft in the middle. I tried adjusting the ball so it would not do that, but it still filled to the top. I replaced the guts thinking maybe that was the problem. The new guts did the same...

Landlord will not Clean mold or replace mold covered cabinate in a timely Manner [ 4 Answers ]

We have Mold in our rented house! We had a pipe break under our kitchen sink and the landlord came and fixed that about a month ago, and said he would be back to fix the cabinate under the sink. Well it is now COVERED in mold and its even growing in the drawers. We called and he came and "cleaned"...

Toilet overfills+ tub fills with water= total disaster [ 7 Answers ]

:( :( :( My bathroom is a mess! For the past month our toilet has been making gargling sounds and lots of bubbles. We paid no attention to it, so now it overfilled. We also noticed that when we wash at home, all the dirty water fills our bath tub and our toilet simultaneously makes these...

Kenmore 665 dishwasher overfills [ 3 Answers ]

My 13 year old Kenmore 665 dishwasher overfills. I have checked the overfill control valve, but it's OK. No matter what I do, water keeps flowing into the machine from the intake port on the left side. What do I do?

Toilet Overfills and leaks out the flusher handle! [ 2 Answers ]

Hi, I am a girl who lives alone and has no handyman skills. Recently my toilet started leaking and I thought the tank was broken, but when I opened the back it was filled way above where its supposed to be. I tried to reset the filler indicator thing, but it still fills too high. Does anyone...