Off set a drain

tahneev123 Posts: 1, Reputation: 1

New Member

Sep 11, 2008, 01:56 PM

Off set a drain

Can a main drain be offset

speedball1 Posts: 29,301, Reputation: 1939

Eternal Plumber

Sep 11, 2008, 02:07 PM

Originally Posted by tahneev123

can a main drain be offset

It will depend upon the length of the off set. How much of a off set are we talking about? Regards, Tom

Add your answer here.

Check out some similar questions!

Steps to convert basement toilet drain to shower drain [ 2 Answers ]

I want to convert a basement toilet drain to a shower drain. Is it a job that a do it yourselfer can do? If no- who do I hire-a plumber or a contractor? What would be a high end estimate of the cost to hire someone in New York? Also, sitting on the floor about a foot directly in front of the...

Vent for Washing Machine Drain Attached to Existing Drain Line [ 0 Answers ]

"Current setup for a washing machine has the discharge hose "hooked" into a laundry tub. Tennants would like something more "permanent." The laundry tub has a normal trap followed by a horizontal run of about 2 feet (2" threaded pipe) then "T's" into a vertical drain/vent. The vent line goes...

Copper sink drain too slow, not clogged which type drain is best [ 2 Answers ]

We just refinished bathroom with double vanity copper sinks. They have a flat grid drain in the bottom, not vented. Is there a different drain that would allow the water to drain easier? We have to swirl water or stir water to get it to begin draining, like there is a suction...

Outgoing Drain Behind Vanity Cabinet Not Aligned with Sink Drain Tube in New Sinktop [ 1 Answers ]

I'm installing a new vanity cabinet and new marble vanity top, both slightly larger than the originals. The problem we've encountered is that the drainage pipe that will exit sink water from the sink to the house -- the PVC pipe in the house/wall -- is not aligned with the new location of the sink...

Converting cast iron floor drain to shower drain [ 3 Answers ]

I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent...