Ask Experts Questions for FREE Help !
Ask
    sk14's Avatar
    sk14 Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 9, 2008, 09:31 AM
    Reset gas water heater
    My state gas water heater is only 6mo old, it got a little wet yesterday because plastic tubing that runs above it to my refrigerator upstairs got a pinhole leak, so water heater got a little wet till we shut water off. Now thermostat won't reset and lights on thermostat have error with FV sensor but there is no gas leaking or any other flammable vapors present at all. Any ideas how to reset the thermostat?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Sep 9, 2008, 09:36 AM
    Did you turn the power off and then back on for the water heater?
    sk14's Avatar
    sk14 Posts: 3, Reputation: 1
    New Member
     
    #3

    Sep 9, 2008, 09:39 AM
    Yes
    sk14's Avatar
    sk14 Posts: 3, Reputation: 1
    New Member
     
    #4

    Sep 9, 2008, 09:47 AM
    Yes I shut the power off and back on the water heater

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help deciding between a tank or tankless water heater [ 19 Answers ]

Which one saves me money; the tankless water heater or conventional tank water heater? :confused:

Hotwater heater keeps needing breaker on the heater reset? [ 6 Answers ]

Hotwater heater keeps needing breaker on the heater reset? About every 4 or 5 days I have to go hit the red button on the heater and reset it. Its electric. Its only 2 years old and nevr has any problems so far. What gives?? TIA

Water heater hookup with sidearm supplimental heater [ 0 Answers ]

Hello: I'm hooking up a sidearm heater to an existing electric water heater for use with an outdoor wood furnace. I've seen diagrams showing the upper port of the potable water side hooked up to the anode port, the TPV port, and the cold water inlet port. My initial thought is that plumbing it into...

Water heater reset [ 1 Answers ]

I have a brand new state select water heater that occaissionally stops working(2 to 3 times a week) and I have to open the front panel of the heater and hit the reset button and it starts working again. What could be causing this heater to kick itself off? Im in a brand new townhome with a brand...

Connecting a tankless water heater and separate hot water heater [ 6 Answers ]

What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...


View more questions Search