Ask Experts Questions for FREE Help !
Ask
    joeym's Avatar
    joeym Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 6, 2008, 01:00 PM
    Can this ceiling fan be flush mounted
    Have a Hampton Bay ceiling fan with what looks like a 4 or 5 inch rod.. model is AC552 also has an E75795 YL... sku 763693---moving to room with lower ceiling height, fan is about 3 yrs old can it be flush mounted?---Thank you Joe M.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 6, 2008, 01:18 PM
    Do you have a picture of it, or can you find the model online? I can't find anything.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Sep 7, 2008, 08:24 AM
    At the bottom of the canopy their may be a plastic piece that pops out and expose 3 or 6 holes, If they Match up with 3 holes in top of fan, then it is likely.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Sep 7, 2008, 06:12 PM
    True.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cold and drafty from ceiling mounted cold air return [ 1 Answers ]

I recently purchased a adobe style home built in 2000 with a Single Roof Mounted combined HVAC system in the Albuquerque New Mexico Area. Directly below the HVAC is the only cold air return duct work located in the ceiling of the Hallway on one end of the Home. A single Thermostat for the entire...

Flush mounting a ceiling fan [ 2 Answers ]

I am attempting a flush mounted install of a 52" Hampton Bay "Belmont Baroque" ceiling fan, but am stimied by the absence of paper instructions from HB. As it is now, the fan is screwed tight into a fixed placement...housing to piece that covers the electrical box. I do have an extension rod with...

Outdoor Ceiling Fan - Surface Mounted Electrical Box [ 1 Answers ]

Hi! I'm connecting a Hampton Bay "Nassau" ceiling fan to a surface-mounted (not recessed) electrical box outside in the backyard arbor. The standard 4" electrical box is mounted to the bottom of a thick joist with the wires running through the joist itself. However, the canopy sems to have a...

Flush Mount Ceiling Fan [ 2 Answers ]

We are building a house with 9 foot ceilings in some bedrooms. Does anyone have any suggestions for flushmount ceiling fans? I would assume we would need to stay around a foot total, including lamp kit, from ceiling to botton of unit. Any suggestions are appreciated.

Installing Wall-Mounted Remote Control - Ceiling Fan [ 6 Answers ]

Hello everybody: I am new to this board and hope there is somebody around this Memorial Day Weekend who can help. I just bought a Modern Fan Company Aurora Hugger ceiling fan and am trying to install it. This fan has no pull cords and operates on a remote that is tucked into the fan housing....

View more questions Search