Ask Experts Questions for FREE Help !
Ask
    tsquarters's Avatar
    tsquarters Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 6, 2008, 12:36 PM
    Sewing sleeves
    How do I add sleeves to a sleeveless dress?
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Sep 9, 2008, 02:14 AM
    Hi, tsquarters!

    Okay, I'm not some sort of sewing expert, but your question wasn't getting answered, so I decided that I would take a shot at answering it and hopefully be helpful to you. I care that your question gets answered. Perhaps someone will still come along who really knows about this sort of thing.

    I would think that you would be able to find patterns for sleeves at a craft and/or fabric store. Also, I did find a post by someone on the following link that is about one-third down the page that you might find to be helpful to you.

    *Jen* | Modest Prom & Homecoming Dresses
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I make puffball sleeves on my dress? [ 3 Answers ]

PLEASE PLEASE PLEASEEE HELP MEE I am making a dress.. it is just a plain straight cream dress but I want 2 add long puff ball sleeves. I want these sleeves to be really dramatic however, once I know how to actually make a puffball sleeve I can work how to make them bigger and more puffier etc...

Sewing ? [ 1 Answers ]

I am starting to sew, not real good at it, but I have always laid my pattern on my material with right sides to the outside. Is this not correct. The pattern I am working on now states if you fold the material put the right side in, and then lay the pattern and cut. Is this correct? Don't want...

Value of Raymond Sewing Company Foot Pedal Sewing Machine [ 1 Answers ]

I am in possession of a Raymond Company foot pedal operated Sewing machine and I am wondering roughly what it may be worth. I believe it is from the late 1800's.

Cast iron sleeves in concrete [ 3 Answers ]

I installed cast iron pipe sleeves in a concrete wall and need to remove at least 3" of the sleeve to get the conduit seal in the wall. I need a way to remove that with minimal damage to the exterior of the wall.

Plumbing sleeves for pool replumbing [ 2 Answers ]

Does anybody know of a product for resleeving 1.5 copper pool pipe? I am repairing a concrete/plaster inground pool built in the late 50's. 1.5 inch copper pipe was used. I know I have a leak on the return line and also believe I have one on the main pool drain (the pool water level drops to...

View more questions Search