Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Nordyne heater
 [ 3 Answers ]
 Indicator Light blinking twice shows pressure switch is open will not allow blower or heat to work. 
Nordyne E2EB-020 Ha. Ac/Heater, having problems
 [ 3 Answers ]
 I have a Nordyne Model # E2EB-020HA, SER # E2E010105593. Have had problems with this unit. Had a heating contractor come out 3 times, but still have same problem. You turn the ac on, it runs good for a while. When it cuts off, the heating coils come on and stay on, but blower does not come on.... 
Nordyne heat pump high suction in heat
 [ 1 Answers ]
 I have a 2 yr old heat pump.in heat mode at 40 deg outside I have 120 psi on the suction and 160 psi on the disc. 99 deg. At discharge from condenser.first season for heat.sounds like a stuck or leaking reverse valve. Any suggestions. Thanks ps I tried switching from air to heat a few times 
Nordyne air&heat
 [ 2 Answers ]
 Wireing diagram for thermostat&heat strips 1-5kw 1-10kw 
Nordyne heater fan not working right
 [ 1 Answers ]
 
I just moved into a 1991 mobile home with a heater of the same age. The furnace is a Nordyne Intertherm model MGHA 056ABFC-01 Forced air and natural gas heater. The problem is with the fan I turn the thermostat up to turn the furnace on. Once the burner heats up the fan turns on, The fan... View more questions Search 
  |