Ask Experts Questions for FREE Help !
Ask
    dkksh93's Avatar
    dkksh93 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 3, 2008, 06:53 AM
    Kenmore HE3 washer error message
    I have a Kenmore HE3 front loading washer. I keep getting error 6. Manual doesn't address error code 6. Any ideas?
    piyush singhal's Avatar
    piyush singhal Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 3, 2008, 07:04 AM
    Regularly walking ,join then gym and control the diet
    piyush singhal's Avatar
    piyush singhal Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 3, 2008, 07:07 AM
    Regularly walk,join the gym ,control the diet,exercise
    leveret2010's Avatar
    leveret2010 Posts: 3, Reputation: 2
    New Member
    		  
    #4

    Nov 17, 2008, 06:10 PM
    F/ 06 is a drive motor Tachometer Error

    The control is unable to properly detect motor speed and machine will shut down.
    If a failure occurs at high speed , the door will be unlocked after 3 minutes.

    When my he 3t had problems, I found the technical documentation inside the machine washing taped to one of the inside walls.

    F/02 long drain
    F/05 water temp sensor error
    F/07 motor control unit error

    Also: the error "Sud" can mean too much detergent but it can also mean a problem with the drain pump ( a clog in the pump filter). Clean out the filter before the drain motor goes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Error Message F11 on Kenmore Elite He4T [ 5 Answers ]

I have a Kenmore Elite He4T washer that keeps stopping near the end of the wash cycle with an error of F11. It seems to not occur until 2 or 3 loads have been washed. It appears to be related to a final rinse cycle I think. The washer is a couple of years old. I can usually press the...

View more questions Search