Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New 200 amp service
[ 21 Answers ]
Upgrading to new 200 amp service. I have installed new 200amp /main lug/30 spaces /40 circuit/ Square d in house. I have ran #4/o al. with ground in 2 inch conduit, 24 inch below ground, to outside where new 200 amp serv. Disc. Will be. Ground is rocky with clay. I am worn out, used old pick and...
Upgrading from 100amp service to 200 amp service
[ 1 Answers ]
I have a 1994 model double wide home, and would like to change my 100 amp service to 200 amp service. ( I want to go to electric heat) I have a disconnect at the house after the meter and it say 200amp. Is the wiring from there to my breaker box able to handle 200 amp service, and if not how do I...
What is the difference between "Service Pack 2" and "Service Pack 2 v 2096" for Windo
[ 1 Answers ]
I M CONFUSING IN WINDOWS SERVICEPACK 2 AND SERVICE PACK 2 V.2096 What is the difference between "Service Pack 2" and "Service Pack 2 v 2096" for Windows XP. Thanks Purendra
100 amp service vs. 200 amp service
[ 4 Answers ]
:) I am looking at a small (totally remodeled home) with 100 amp service. I always thought it was better to have 200 amp. I will live there alone. Does this mean I can't run the dryer and microwave at the same time?
Changing from metered service on my shop to service from my house.
[ 2 Answers ]
I’ve had the meter and 3 wire service cable removed from my shop. I’ve purchased 90 feet of 100 amp direct burial cable to run from the lower section of my home meter to my shop. Not being an electrician, I’m still trying to install this changeover. The direct burial cable has 4 wires. 2 larger... View more questions Search
|