Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Leveling the ground with mulch for above ground pool
[ 3 Answers ]
I was wondering if I could use mulch to level the ground for my above ground pool. I was told not to use sand, and I have a hard time digging.
Exposed Lighting Fixture in Shower Stall
[ 2 Answers ]
In old buiding condo conversion, builder has left an exposed fabric wrapped wire (circa 1930's?) hanging light fixture in shower stall with exposed light bulb. It is in a slightly- recessed shelf area, but is within reaching distance from water source and is less than five feet from the shower...
Removing Fluorescent for New Track Lighting Fixture
[ 1 Answers ]
After cutting power and removing the fluorescent light fixture I noticed the old fluorescent unit was wired directly to the main wire, bypassing the box previously installed in the ceiling. No ground had been connected either. Now I want to install the new track lighting fixture, but want to...
Harbor breeze ceiling fan lighting fixture/no electricity
[ 3 Answers ]
I'm installing a light fixture onto a harbor breeze ceiling fan. The fan works fine but the light fixture won't illuminate. I disconnected the fixture and noticed that the lines from the fan going to the light fixture doesn't have any electricity going to them. Any ideas?
Hampton Bay Fan Lighting Fixture heating up
[ 8 Answers ]
I've installed 4 Hampton Bay fans with attached lighting fixutres and they all work fine except for the last one I installed. The lighting fixture gets really really hot after just a few minutes of operation and I can't figure why. This fan like the others is being installed in place of an... View more questions Search
|