Ask Experts Questions for FREE Help !
Ask
    scooby1475's Avatar
    scooby1475 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 27, 2008, 09:59 AM
    Blower won't stay on
    Hello, I have a Intertherm Oil Furnace Model# MAC 1265 Appliance No.F000194504. Not sure about the year it's old, yearly maintenance done though. The furnace turns on and starts heating then shuts off. The blower turns on in a few seconds but turns off again and the furnace stays warm. It keeps doing this I adjust the thermostat and nothing changes. I felt the motor and it feels quite warm. It is firing okay but doesn't want to keep the blower going. Any help would be greatly appreciated. Thank you in advance, Denis
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Aug 27, 2008, 11:00 AM
    Does your thermostat have 2 settings for the fan, ON and AUTO? If so move the switch to ON and tell us what happens.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower stay on all the time. [ 1 Answers ]

My intertherm electric furnace blower will not kick off. I have replace the thermostat but I still habe the same problem. The only way I can get the blower to turn off is by shutting the breaker off.

American Air gas pack blower won't stay on [ 2 Answers ]

I have a 12 year old unit which has recently had the heat exchanger replaced and a new thermostat installed. The blower will work for a few minutes when the heat cycle starts and then shuts off. I thought it might be the heat sensor on the blower and so I temporarly disconnected the sensor. I...

Blower stay on [ 1 Answers ]

Any tempstar experts? Blower Stays on even thermostat is diconnected at the board. Replaced board but, It's still doing the same thing

Furnace Blower won't stay on [ 1 Answers ]

I have a problem with my furnace blower not staying on. I can set my thermostat for say 74 degrees and the furnace will come on normally. I can hear and see the furnace on, but it takes roughly one minute (ive timed it) before the blower comes on. I know the minute delay is pretty normal;...

View more questions Search