Ask Experts Questions for FREE Help !
Ask
    littletaz09's Avatar
    littletaz09 Posts: 4, Reputation: 1
    New Member
     
    #1

    Aug 24, 2008, 10:12 AM
    Changing rotors
    How do you change rotors on a 96 honda hatchback
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Aug 24, 2008, 10:28 AM
    . Loosen lug nuts, raise vehicle, and support securely on jack stands. Remove front wheel.
    . Remove bottom caliper pin. Raise and remove caliper, supporting it with a piece of wire.
    . Remove brake caliper pads, caliper mounting bracket, and disc.

    During assembly, clean and coat caliper pins with silicone grease or Squeak Relief (silicone grease with Moly). Apply Molykote M77 or Squeak Relief to the back of the shims. Tighten caliper bracket bolts (12 mm) 80 lb.-ft. caliper pin bolts (8 mm) 20 lb.-ft. and lug nuts 80 lb.-ft.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Barke rotors 2004 toyota coralla [ 4 Answers ]

I can not get the rotors off does the nut have to come off?

Removing rear rotors 04 F-150 [ 3 Answers ]

I have removed and replaced the brake rotors of my 04 F-150. No problem. The rear rotors will not budge. Any tricks or solutions?

How do I remove rotors from car [ 3 Answers ]

I want to replace the pads and rotors on my 1991 Buick Park Avenue. I have done this on Ford products but I am not sure if it is the same on a Buick. Are there any "tricks" to removing the old rotors? Thank you for your help.

Not rotors or tie rods [ 2 Answers ]

wussup ladies and gentlemen. My vibation problem is still occurring. I have received sum good replies. At various speeds my car shakes. Sometimes it feels like its in the whole car. Could my problem be transmission mounts?

1999 Lincoln Town Car Brake Rotors [ 1 Answers ]

I know that the calipers have to be removed to pull the front rotors. Does the mounting bracket for the calipers also have to be removed?


View more questions Search