Ask Experts Questions for FREE Help !
Ask
    passmeby's Avatar
    passmeby Posts: 473, Reputation: 11
    Full Member
    		  
    #1

    Aug 21, 2008, 12:03 PM
    Socket stuck on lug
    How would you get a piece of a tire iron out of an aluminun rim that is currently stuck on a vehicle? In other words, the socket part of a tire iron broke off on a lug and is snugly stuck around the lug and I can't get the wheel off the vehicle. I have no air tools, just a modest collection of everyday tools. The vehicle can't be driven anywhere, it's not raodworthy. Any suggestions?

    Just to note, the lug is "sunken" into the rim, so it's very hard to get to.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Aug 21, 2008, 01:47 PM
    A Very Powerful Magnet And Pull. USE LOTS OF WD-40. Use a hammer and chisel to try and turn it in the opisite direction you were when this happened. It's probably half stuck on the hex of the nut.
    passmeby's Avatar
    passmeby Posts: 473, Reputation: 11
    Full Member
    		  
    #3

    Sep 1, 2008, 05:17 AM
    OK, I tried everything, but no luck. Is there any other way? I don't care about the rim, the only use it has is as scrap metal so I don't care if it gets destroyed in any way. I do care about the tire, it's basically brand new and will fit on another vehicle I have. So any other ideas? All the other lug nuts are off, it's just this one that is stuck. Any ideas would be appreciated. Is there a tool that can take the tire off while it's still on the vehicle? The vehicle is getting junked, so I don't care one bit about it besides for the parts I want to keep which are just the tires, some interior and the engine. Body and frame is shot/rusted out completely. Thanks again.

    Edit: It's a Ford Bronco if that makes any difference, with aftermarket aluminum rims.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Sep 1, 2008, 06:46 AM
    Can you drill through the end of the lug? Us a small bit first as centered as you can, then use larger bit(s).
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #5

    Sep 1, 2008, 07:25 AM
    Shear or cut the lug off, drive it out of the hub, and insert a new lug.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #6

    Sep 1, 2008, 09:44 AM
    Time to get out the yellow pages. You need a mobile welder with some Oxy-Acetylene torches. Heat works wonders. You could try a small propane torch yourself, but it really needs cutting.
    Since you put it as basically junk, then it's a small price to pay.
    Just don't do it with air in the tire and the valve core out. Safety first!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #7

    Sep 1, 2008, 10:53 AM
    You might also try a hammer and chisel try to turn the opposite from the way you turned that broke it off.
    Also Jack up the wheel to keep from binding.
    If you have a Die Grinder, try cutting right through the lug socket, then maybe split with hammer and chisel. Use eye protection.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 way lamp socket [ 5 Answers ]

I have just replaced an old 3 way (knob style) lamp socket with a new 3 way pull chain lamp socket. The bulb is good, but the lamp only lights on 1 stage. What did I do wrong?

Convert A15 intermediate socket to A19 standard socket [ 10 Answers ]

I need more light from my Hampton Bay ceiling fan light. It has the new A15 Intermediate base bulb and does not put out enough light. Is there a fluorescent bulb available for the Intermediate base socket? Is there an adapter available for the socket that would allow me to use a Standard size...

New 3 wire socket replacing two wire socket [ 5 Answers ]

We have a room that had a 2 wire socket, originally installed, and a three wire socket that was changed from a two wire socket by myself, called "Socket A". Recently an electrician installed two small fans in the same room and changed the 2 wire socket "Socket B" into a 3 wire socket. He did not...

Wet socket and one other not functioning [ 3 Answers ]

About 6 months ago my patio wet socket and another normal 110 socket in my garage stopped functioning. I checked all my breakers and none were tripped. Nothing else in the house is not working, just those two sockets. Any thoughts on what it might be? I replaced one with a new socket, but there is...

View more questions Search