Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pilot light blows out on hot water heater (electric start)
[ 8 Answers ]
I have a gas powered electric hot water heater with an electric push button start. Ever so often (more recently now even) the pilot has extinquished. I have to place the dial setting back to the pilot light position, and press the started button each morning to get it lit again, and then turn the...
Does putting gas hot water heater dial on PILOT put pilot light out?
[ 5 Answers ]
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
Pilot light on Furnace continues to go out, blows cold air
[ 4 Answers ]
The pilot light on my Lennox Furnace continues to go out. The furnace is now blowing cold air. The pilot light has been relit 3 times in the last 24 hours. The thermocouple box has already been replaced. No, there is not a draft of air near the furnace. Why does the furnace continue to do...
Pilot light stays on but pilot switch keeps resetting
[ 5 Answers ]
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...
Pilot light is on but furnace blows cool air
[ 1 Answers ]
Came home today to find my house at 53 F. Thermostat was set at 68, so I checked the breaker and that was fine. Checked the wires from the t-stat to the furnace and everything looked good. Pilot light was lit, so I turned the fan switch to "manual" and now the furnace is blowing cool air. I've... View more questions Search
|