Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Add a receptacle to a 3-way switch
[ 4 Answers ]
I hope that this is possible, since I don't have the option of pulling new wire to this location. I want to add a receptacle next to an existing 3-way switch that controls a fluorescent light in a kitchen. Coming into the junction box is a single 12/3 nm cable, with a black, a red, and a white wire...
New Dimmer/Fan Switch
[ 1 Answers ]
I just purchased a dimmer/fan switch (Harbor Breeze) The fan will only come on or work when the light is on. When I turn the light up al the way, the fan on high will run at full speed, but when the light is dimmed the speed of the fans goes down, it'll also go down if I turn the fan speed...
Branching a Receptacle from a Square-D pressure switch
[ 1 Answers ]
I recently purchased a house that is serviced by a well. The pressure tank is located outside next to the house in a small shed. The previous owner wired a receptacle into the square-D pressure switch to allow them to power a light bulb to keep the pipes from freezing. The circuit is protected...
Switch Controlling Half of a Receptacle issue.
[ 2 Answers ]
Hi there, I'm having a slight issue, and I don't know what I did. I replaced all of my outlets with a newer style. However, one (half of an) outlet USED TO be controlled by a switch that's 5 feet away. Now this switch does nothing. The outlet is completely hot at all times on both outlets. ...
Combination switch and receptacle?
[ 2 Answers ]
How do I install a combination switch and receptacle. I presently just have a light switch? Thank You. View more questions Search
|