Ask Experts Questions for FREE Help !
Ask
    skjohnson's Avatar
    skjohnson Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2008, 06:19 PM
    Reversing a Hunter fan with no pull chain
    How do you reverse a Hunter ceiling fan with no pull chains, and mounted on a 12 foo t ceiling? It is only remote controlled.
    skjohnson's Avatar
    skjohnson Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Aug 17, 2008, 06:21 PM
    HELP!:confused: :confused: :confused:
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Aug 17, 2008, 07:45 PM
    Inspect your hand held remote carefully for a small button usually near the top. This button is very much smaller than the fan speed buttons or the light button. Try that button.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Aug 18, 2008, 07:36 PM
    If there is not a reverse button on the remote then it is somewhere on the fan. What model Hunter fan is it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter fan chain pull [ 4 Answers ]

I pulled out the pull chain right out of the unit. How do I repair it?

Hampton Bay pull chain [ 3 Answers ]

I disconnected all 4 wires from the pull chain before writing down their configuration. I have 2- black wires, a red wire and a blue wire. My new pull switch is labeled L - 1 - 2- 3. Does anyone know the wiring configuration?:confused:

Pull chain switch [ 3 Answers ]

:confused: I was told that I could convert any light fixture to a pull chain light by drilling a hole in the light canopy and connecting a pull chain switch. I did that and got the light to work but it will not turn off with the chain, I have no wall switch. Is this all wrong or have I connected...

Pull Chain switch [ 1 Answers ]

I am wanting to add a pull chain mechanism to a new, hard wired type light fixture. I have purchased a ceiling fan light kit pull chain mechanism. The pull chain mech has red, blue and black wires:eek:. . The fixture has white, black and ground. . How do I wire this up?

HELP! Wiring a pull chain in a Hunter ceiling fan [ 3 Answers ]

Ok, my 81 year old mother's ceiling fan pull chain broke off inside the switch. I was careful when I changed the switches, only changing one color at a time. It didn't work, so I called my electrician brother-in-law who discombooberated the whole mess, told me the switch I got was bad and went on...

View more questions Search