 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The Mass Airflow Sensor (MAF) provides a vital input to the Engine Control Module (ECM).
It's purpose is to calculate, very accurately, the amount of air moving into the engine. The ECM uses that information and information from other sensors to adjust fuel volume to provide the proper mixture. While the MAF is necessary for the engine to run properly, it won't prevent the engine from turning over. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can anyone tell me how to test air mass flow meter ( sensor)? I have 2003 Toyota corolla ( Altis in Philippine) 1.8G and has been running very well since I bought it new. Two days ago while driving to work, the car suddenly stopped, and will not start again. It had to be toed to Toyota and after...
97 Nissan Pickup - 160,000 miles - KA24E engine -Check engine Soon Light Code reader says volume air sensor. Is this the same as a mass airflow sensor or the MAP sensor? Where is this sensor located, in the throttle body injection? Just threw a new O2 (Bosch)sensor on it, I lost that bet.. it...
Does anyone know how to convert a air flow meter to map sensor in a nissan skyline r32 rb20? [email protected] if you do
I have a 1994 mustang gt, 5.0 ltr HO. I am going to put a 75mm throttle body with trick flow track heat intake and 24lb injectors. What size mass air flow sensor should I use. PLEASE HELP!!
When I turned on my A/C for the first time yesterday it came on and after aboout 10 minutes the air flow stopped. I went outside to see if my unit was still running and it was, but no airflow. I cleaned the filter and hosed off the coils from the outside unit and still the same thing, no airflow...
View more questions Search
|
