Ask Experts Questions for FREE Help !
Ask
    nolesskins's Avatar
    nolesskins Posts: 5, Reputation: 1
    New Member
     
    #1

    Aug 15, 2008, 02:05 PM
    Selecting Replacement Heat Pump/AC
    I'm in process of selecting a replacement Heat Pump/AC for my 35 year old home. 2400 sq ft. one level. Panhandle of Florida. Current unit was a Lennox, installed approximately 20 years ago and now the compressor is making some strange noises but still cooling OK. I'm looking at possibly having a Payne installed in the Fall if the old one holds up that long. The current unit is a 4 Ton, 2 speed motor and cools better than it heats. I also have a dehumidifier unit that I "think" bumps up the motor speed a little if the humidity in the house rises about a set level. The AC & Heating installer doesn't think I need that feature in my new unit. I'm told that Carrier now manufactures the Payne units. I frankly had never heard of Payne. The company giving me an estimate can also sell me a Goodman or a Trane or Carrier.

    Two questions after all that gibberish. Is the Payne a reliable product? What size, features, extras, etc. should I be looking at in heating and cooling my home?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Aug 15, 2008, 04:30 PM
    Name brand doesn`t make much difference they all are pretty much the same,the most impprtant thing is good installation,from a experanced contracter,and ask which has the best warranty,most contractors will give you a free service for at least a year,some more.I personaly don`t like carrier,they seem to need a lot more parts than other units.Buy what you need only,the higher 14-15-16 seer equipment can cost a lot more,when you purchase and also down the road
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #3

    Aug 15, 2008, 05:42 PM
    I for one like carrier but that's my opinion. Payne is at the bottom side of the carrier product models, more of a cheap builders model that is put in spec homes. But all brands have the lower end models they offer. Get 3 prices from 3 different companies. Check warranty and SEER with each model and make.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

A/c(heat pump)smells after thermastat replacement [ 1 Answers ]

I have a rheem heat pump and recently changed the old thermastat to a honeywell 7400 programmable... everything seems to work fine, but since the change I have noticed a distint smell (sulphur/ozone?) anyone have any suggestions? Wondering if I may have a wire incorrectly installed?

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Ductless A/C with Heat Pump - Heat pump does not come on [ 1 Answers ]

Hi The A/C works great but in the morning when its cool outside and I switch on the Heat the indoor unit makes a clicking sound and the fan stays off - after about 8 minutes I switch to A/C I get a rush of ice cold air along with some mist. Seems like when I switch to heat the indoor unit...

Trane Heat Pump tstat replacement with Honeywell prog - wiring question [ 1 Answers ]

I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...


View more questions Search