Ask Experts Questions for FREE Help !
Ask
    Mastamynda's Avatar
    Mastamynda Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2008, 03:45 AM
    angular motion
    A wheel of radius 25cm has eight spokes. It is mounted on 2 fixed axle and is rotating at a constant angular speed. You shoot a 20cm long arrow parallel to the axle through the wheel at the speed of 6m/s. The arrow and the spokes are supposed ve be thin. Calculate the maximum value of angular velocity in rad/s so that the arrow just goes through without hitting any spokes.
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Aug 14, 2008, 03:57 AM
    What is your question ?
    Is this perhaps homework ?
    If so, please repost that in the homework section !

    :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Angular acceleration [ 1 Answers ]

Find the angular accleration of a thin ring of radius 0.300 m and 1.50 kg mass if a constant 20.0 N force acts on a string wrapped around the ring's circumference. Find the angular velocity of the ring after 5.00 seconds.

Angular speed of the mass [ 1 Answers ]

The ball with mass m connected by means of two massless strings to a vertical rotating rod. The strings are tied to the rod and are taut. The tension in the upper string is T1. (Each angle of an and equilateral triangle is 60 degrees.) What is the angular speed of the mass?

Angular speed [ 2 Answers ]

When using the Speed= distance/time how would one go about plugging numbers in if the question in a wheel has the diameter of 7 and rotates 1700 revolution per minute. I know you use the Circunfrace which is 14pie then what do you do about the 1700 revolutions; where does that fit in? If any one...

View more questions Search