 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I know it appears that you lose pressure but what is happening is you do not have enough volume. Something is restricting your flow to less than what your head will handle, probably 1.6 g/m You might want to disassemble your mixing valve and inspect for debris.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, Here within the last two weeks the water pressure in the walking shower as all but completely stopped. I cleaned the shower head and extension arm thinking there would be build up in them but there wasn't. Now the water doesn't come out but a very slow drip. Everyother faucet and/or stool...
Hello, My sink in the bathroom has good solid water pressure. Next in the circuit is the toilet, which also has good pressure at the angle valve. The shower, however has terrible pressure. I have removed the head, and the pressure out of the shower neck is no better. Shower neck exits the...
My daughter and I just moved into a new house and have no pressure in the showers. I know there are things to buy and install inside or out side. Can you please give me a few way's to get more pressure? Thank you, Missie
How do I get better water pressure in our shower?
This morning while taking a shower, I was greeted with a grumbling in the pipes and then a loss of pressure. Sink on the other side of the wall works fine, as does all other faucets in house. Not sure where to begin sorting out this problem, and welcome any suggestions.
View more questions Search
|
