Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Very Old GE Heating+Cooling Thermostat
[ 5 Answers ]
Upgrading a 30+ year old GE heat/cool thermostat, running an oil fired hot air plus central A/C system to a programmable Honeywell thermostat. There are five thermostat wires. White, yellow, red and green are attached to W, Y, R and G terminals on the old thermostat and transfer easily to the new...
Heating/ thermostat problems
[ 2 Answers ]
I don't know much about HVAC because I haven't had many problems till now. My thermostat (honeywell T8001C) display goes blank and the heat will not turn on. I've tried flipping the breakers in the garage. That won't work. Any ideas?
Heating - Thermostat Control
[ 3 Answers ]
I have a maple chase Thermostat control in my home. It was flashing low battery, I changed the battery,I had also noticed the temp had dropped to 63,(at all times I keep it set at 68 in the fall in winter months). Since I have changed the battery I cannot get the temp back up above 60. It will...
Underfloor heating thermostat
[ 1 Answers ]
I am trying to wire up my underfloor heating but I'm not sure weather the wire with the power is the load or feed, if any one could let me no that would be great. Thanks. Darren
Thermostat heating cycles
[ 4 Answers ]
What can happen if I use a heat cycle of 5 versus 3. I bought two honeywell thermostats. RTH6300b. There is some confusion as to what heat setting to use. I have a new oil furnace, a system 2000 furnace with forced hot water. The thermostat says to use a setting of 5 if I have a gas or oil... View more questions Search
|