Ask Experts Questions for FREE Help !
Ask
    mlp0071's Avatar
    mlp0071 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2008, 07:01 AM
    Broach of Bathtub Stem Rusted - Options?
    Hi there. I live in a very old house with old plumbing. The pipes are probably at least 30 years old.

    Anyway, the tip (broach, I believe) of the cold water faucet stem is rusted and I can't get a faucet handle to grip it for any length of time. Do I have any other options but to replace the whole stem?

    Thanks in advance for your help.

    mlp0071
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 7, 2008, 10:56 AM
    Quote Originally Posted by mlp0071
    Hi there. I live in a very old house with old plumbing. The pipes are probably at least 30 years old.

    Anyway, the tip (broach, I believe) of the cold water faucet stem is rusted and I can't get a faucet handle to grip it for any length of time. Do I have any other options but to replace the whole stem?

    Thanks in advance for your help.

    mlp0071
    They make universal handles for your problem,(see images) They come in cross or straight handles. They have a pointy set screw that bites into the stripped spline and secures it tightly. Ask around for Universal Replacement Handles. Your only other option would be to attempt to replace the stem and washer assembly. Good luck, Tom
    mlp0071's Avatar
    mlp0071 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 7, 2008, 11:01 AM
    Thank you!

    Quote Originally Posted by speedball1
    They make universal handles for your problem,(see images) They come in cross or straight handles. They have a pointy set screw that bites into the stripped spline and secures it tightly. Ask around for Universal Replacement Handles. Your only other option would be to attempt to replace the stem and washer assembly. good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I install a hot and cold valve stem for a bathtub? [ 8 Answers ]

I need to know if anyone can send me the steps for installing hot and cold valve stems for a bathtub and if you can send a diagram of a normal bathtub bathtub and what each part is so I can help my brother-in-law and sister get their bathtub fixed. Please respond as soon as you can. Thanks.

Bathtub stem broken, leaking issue. [ 4 Answers ]

I live in a mobile home and we've been having problems with our bath tub faucet since we moved in. Originally it started as a tiny little leak and grew to a gallon a minute type of leak, full force, no holding back. We turned our water off and replaced the stems in them because we figured that was...

Unknown bathtub faucet valve stem - what is it? Where can I find one like it? [ 6 Answers ]

I was working on my girlfriend's bathroom faucets this weekend. I took apart the bathtub faucets. I had never seen this style before, but, not being a professional, I thought that was just me. I live in Paducah, KY. I took it to the Lowe's and Home Depot with no luck. I then took it to the two...

Stem problems in bathtub [ 3 Answers ]

I was wondering if a novice could get some advice. I have an old home and with it an old plumbing system. I have faucet knobs for my shower and 2 for my tub water. The hotwater knob for my Shower started to spray water from the stem. I took it apart and exposed the Cartridge and after that it...

View more questions Search