Ask Experts Questions for FREE Help !
    rayachi's Avatar
    rayachi Posts: 19, Reputation: 1
    New Member

    Aug 7, 2008, 12:11 AM
    Gas valve
    How you do know if gas valve bad or good ?
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66

    Aug 7, 2008, 12:25 AM
    A gas valve in what type of equipment, Rayachi, and what type of gas valve?
    If that is a manual gas valve, just open or close it to see.
    If it is an electrical valve, just activate it to see the result.
    But without detailed information on it's type or use it is rather difficult to provide you with specific information!

    rayachi's Avatar
    rayachi Posts: 19, Reputation: 1
    New Member

    Aug 7, 2008, 07:25 PM
    Water heater gas valve

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Safety valve & relief valve [ 22 Answers ]

What is the difference between safety valve and relief valve

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

Diverter valve leak - 3 valve diverter valve? [ 1 Answers ]

My shower has three knobs and the one in the middle diverts the water flow from the tub spout to the shower. I think that means I have a 3 valve diverter valve, if not please correct me. When I turn the diverter knob so that the water comes out of the shower, there is still significant water...

Three valve diverter valve [ 1 Answers ]

On the three vlv diverter, I've removed the diverter stem, but I'm not sure how the seat comes out. If it screws out, do you have to have a special tool for that or can I improvise?

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search