Ask Experts Questions for FREE Help !
Ask
    rt46562's Avatar
    rt46562 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 4, 2008, 02:23 PM
    Maytag neptune dryer venting
    Can the Maytag Neptune Model Md5500 gas dryer be vented out the side instead of the back?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Aug 4, 2008, 02:29 PM
    Regardless of out the back or the side it must be properly vented to the outside. If the unit already has a vent at the back would suggest you stick to the position the manufacturer has given you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Neptune Gas Dryer not heating [ 3 Answers ]

Hi, :( I have a Maytag Neptune gas dryer that will not heat all the time. I can hear the sound when the heat comes on and then about 2 minutes into the cycle it stops heating. I have cleaned the vent hose from the dryer to the outside so that is not the problem. Just want to know whether to order a...

Maytag Neptune dryer wiring [ 1 Answers ]

I have a Maytag Neptune Dryer MDL# MDE5500AZW I took it apart to recover a piece of jewellery and put it back together without attaching the wiring lines back to the door switch.:o I can not remember how they re-attach. As I assume one is a ground and the other two are power feeds... I do not want...

Maytag Neptune dryer not drying well. [ 6 Answers ]

I have a Maytag Neptune dryer and it doesn't dry well at all. I am used to putting big loads in it and I don't know if it's too big of loads or what but like 7-10 pairs of jeans and it takes at least 5 hours to dry them... if then. The sensor seems to work but shuts itself off before they are...

Maytag Neptune dryer doesn't dry [ 1 Answers ]

My Maytag Neptune dryer doesn't dry cloths. It tumbles but seems no air enters the dryer. Can't tell if it is a problem with the thermistor, fan or heating element. How do I go about troubleshooting the problem.

View more questions Search