Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Galvanized Drain Section
[ 1 Answers ]
I'm in an older house and need to replace a section of pipe draining from the kitchen sink. Two caveats that are relevant, however: 1. There are clearly two different types of pipe. One is darker (I assume galvanized steel), one is lighter, almost like aluminum. Both have corroded to the point...
Replacing floor flange on slab floor
[ 6 Answers ]
The plastic floor flange is broken and it appears to be poured into the slab. How can I remove it? Can I just ge a new flange that would fit inside the pipe and install it right over top?
Replacing a short section of ABS pipe under the basement floor
[ 11 Answers ]
How can I replace a 24 inch section of ABS pipe (shower drain pipe) when the sections I am connecting to are rigid? I've heard of using 4 90's but surely there must be a way to do this without tearing up any more concrete than I have to?
Must remove concrete floor section to replace rotted rod iron drain pipe in bathroom
[ 1 Answers ]
What is the best way to remove concrete flooring section in a bathroom? We found a broken rotten rod iron drain pipe when tearing out walls for remodeling and unfortunately (blessing) found out the pipe was rotted. Plumber says to replace with PVC but we have to dig up/cut up the floor ourselves....
Replacing toilet floor flange
[ 3 Answers ]
I was replacing my toilet and found that my flange was rusted so much that I couldn't get the flange bolt on one side to lock into the flange so I must replace the flange. It's made of metal with ABS and obviously is glued into the ABS sewer pipe riser. I'm assuming that I need to get underneath... View more questions Search
|